In all over world everywhere motorcycle are used. The side stand plays major roll while the vehicle is in rest position. But it has some disadvantages takes place as while the driver starting the motorcycle, there may be possibility of forget to release the side stand this will caused to unwanted troubles. This is a new type of side stand which is automatically retracting the side stand through some mechanical and electronic arrangement. In this system microcontroller, speed sensor, dc battery is used. Through the speed sensor, sensor sense the rotation of the wheel and sends the signal to the microcontroller which is actuate the dc motor which is caused the disengage the stand from the road. A motorcycle side stand is nearly universal method of allowing a motorcycle rider to park his vehicle easily. If this stand is in the park position while the motorcycle is ridden through left turn a serious hazard exists. A new type stand side stand which is automatically retracting side stand is invented to prevent such type of accidents. Side stand mounted behind bottom bracket and can be bolted on either clamping the chain stays, or welded in to place as an integral part of the frame. The motorcycle side stand consists of steel rod held in both park and stopped position by an over centered spring. It is to provide the stand stability and a support to the motorcycle. Many side stand designs, attachments, mechanisms and rider warning system. Some side stand retracts automatically when the motorcycle is lifted off the support. Some retract if they contact the ground when the motorcycle is moving. Many different concepts have been applied for this hazard.
Newer bikes (and some older ones) may refuse to start with the side stand down. Along with all the other high-tech sensors that are on board, your motorcycle might have a built-in code that keeps the ignition from starting if your kickstand is engaged. 2b1af7f3a8